Custom Made Trailer Hitch Lock from Rigid-Armor with high-quality stainless steel material.

• Made to fit hitch carrier

• Straight pin locks securely

• Safe and secure for your vehicle’s hitch

• Dust and weatherproof

• Convenient design for easy access

• Cover slot to prevent corrosion

• Simple installation with no drilling required

• All ready and made to size

ᐅ 1 Year Warranty

ᐅ Lead times may take up to 3 weeks to receive

Custom Wheel Bolt Lock is designed to have a lock bolt on your spare wheel.

• Made for m12x1.5

• Comes with a Lock Socket

ᐅ 1 Year Warranty

ᐅ Lead times may take up to 2 weeks to receive

This bracket is easy to install and has a thread stud bolt that screws on the top stud. After the wheel has been mounted and secured, add the license bracket.

All hardware screws are included.

ᐅ 1 Year Warranty

ᐅ Lead times may take up to 2 weeks to receive

Swing-Outs have a modular panel located in the back of the wheel mount tower for multiple mounting solutions.

We developed a Fold Out Table that mounts directly to your Swing-Out comes with heavy-duty hinges and a rubber bump stop for vibration noise.

• Powder Coated

• Rubber Bump Stops

• Locking Rubber Pull Lock

• Heavy-duty Frame

• Heavy-duty Hinges

• Lightweight 10 lbs.

• 20"x13"

ᐅ 1 Year Warranty

ᐅ Lead times may take up to 2 weeks to receive

Straightforward install with the proper tools, it mounts to the back of any of our spare tire carriers, back arm, and adjustable to fit multiple-sized tires.

It assembles into two parts the main mounting panel that attaches to the arm and the roto pax bracket holder, which also have multiple slide holes for additional holders like a shovel Fast grip.

This a great essential to have when going out on far-distance trips or desolate areas.

• Main Back Mount – 1pc

• Side RotoPox holder – 1pc

• ⅜ – 3" bolts – 4pcs

• Mount Tabs – 2pcs

• 1" – ⅜ bolts – 4pcs

– Goes great with a 2.5 or 3.5 Gallon, Rotopax, or double stack 2 gallons.

– Side plate holder max weight – 100 lbs.

ᐅ 1 Year Warranty

ᐅ Lead times may take up to 3 weeks to receive

Lightweight precision CNC machined 6061 series aluminum

• Weighs only 1.9 lbs. (steel versions weigh up to 8 lbs.)

• Rated at 8500 lbs.

• Fits standard 2-inch receivers

• Fits common 3/4 screw pin shackles/D-rings (INCLUDED)

• Made in the USA

ᐅ 1 Year Warranty

ᐅ Lead times may take up to 3 weeks to receive

In Partnership with Body Armor, we present the 2018-2022 Crosstrek Revo Rock Sliders.

• 1.5” TUBING

• DESIGNED TO PROVIDE ADDED PROTECTION BETWEEN YOUR VEHICLE AND OBSTACLES

• SUPPORTS ¼ GVWR UPWARD FORCE AT THE FRONT/REAR SO THAT IT CAN BE USED AS A JACK POINT

• MOUNTING BRACKETS ARE DESIGNED TO BE LOW PROFILE AND LESS VULNERABLE TO OBSTACLES

• EASY INSTALLATION-NO DRILLING REQUIRED

• WORKS WITH LIFT KITS (1”-2”) INCLUDING BOTH STRUT LIFT AND SUBFRAME LIFT

• DURABLE 2-STAGE LIGHT TEXTURED BLACK POWDER COAT FINISH

• 3-YEAR FINISH / LIMITED LIFETIME WARRANTY

In Partnership with Body Armor, we present the 270 Awning Driver Side With Mounting Brackets which easily mounts to virtually any roof rack or bed rack

• AWNING IS MADE OF 420D RIPSTOP POLYESTER OXFORD FABRIC, POLYURETHANE COATED FOR 2500MM WATERPROOFING

• PROVIDES 80 SQUARE FEET OF COVERED SPACE FOR SHADE, LOUNGING, COOKING, ETC

• SELF-CONTAINED UNIT INCLUDES RUGGED, LIGHT-WEIGHT EXTRUDED ALUMINUM WITH ALLOY HINGES

• TELESCOPIC LEGS WITH TWIST-LOCK FIXTURES, MINIMUM 55″ MAXIMUM 102″ HEIGHT

• HEAVY-DUTY TRAVEL COVER IS MADE OF STURDY, UV RESISTANT 1000G PVC COATED TARPAULIN MATERIAL WITH HEAVY DUTY ZIPPERS

• 1-PERSON SETUP AND TEARDOWN

• OPTIONAL WALL KIT

• INCLUDES STAKES AND TIE-DOWN STRAPS TO SECURE THE AWNING FOR USE IN WINDY AND INCLEMENT CONDITIONS

In Partnership with Body Armor, we present the Pike Annex Room.

• ANNEX WALLS ARE MADE OF 420D RIPSTOP POLYESTER OXFORD FABRIC, POLYURETHANE COATED FOR 2500MM WATERPROOFING

• ANNEX FLOOR IS MADE OF 550GSM PVC COATED WATERPROOF FABRIC WITH HEAVY DUTY WEATHER RESISTANT ZIPPER

• THE ANNEX MAY BE SET UP WITH OR WITHOUT THE FLOOR INSTALLED

• ADDS OVER 42 SQUARE FEET OF DOWNSTAIRS LIVING SPACE TO THE PIKE ROOFTOP TENT

• CREATES A CONVENIENT ROOM FOR CHANGING CLOTHES, REMOVING MUDDY BOOTS, STORING GEAR, COOKING OR LOUNGING, OR ADDITIONAL SLEEPING SPACE

• ENTRY DOOR AND TWO LARGE WINDOWS WITH MOSQUITO NETTING AND SOLID FLAPS; A “BACK DOOR” PROVIDES ACCESS TO THE VEHICLE’S SIDE DOOR OR TRUCK BED

In Partnership with Body Armor, we present the 4.5’ Awning With Mounting Brackets which easily mounts to virtually any roof rack or bed rack.

• EASILY MOUNTS TO VIRTUALLY ANY ROOF RACK OR BED RACK

• AWNING IS MADE OF 420D RIPSTOP POLYESTER OXFORD FABRIC, POLYURETHANE COATED FOR 2500MM WATERPROOFING

• PROVIDES 30 SQUARE FEET OF COVERED SPACE FOR SHADE, LOUNGING, COOKING, ETC

• SELF-CONTAINED UNIT INCLUDES RUGGED, LIGHT-WEIGHT EXTRUDED ALUMINUM TELESCOPIC LEGS AND ARMS, WITH TWIST-LOCK FIXTURES

• HEAVY-DUTY TRAVEL COVER IS MADE OF STURDY, UV RESISTANT 1000G PVC COATED TARPAULIN MATERIAL WITH HEAVY-DUTY ZIPPERS

• INCLUDES STAKES AND TIE-DOWN STRAPS TO SECURE THE AWNING FOR USE IN WINDY AND INCLEMENT CONDITIONSND TIE-DOWN STRAPS TO SECURE THE AWNING FOR USE IN WINDY AND INCLEMENT CONDITIONS

Wobble Lock Replacement

On the trails, bolts and other items will wear out over time and may loosen up. Sometimes, you may lose or bend the positioning pin while accessing it. Please ensure that when you open the swing-out tire carrier, the Position Pin is at its UPWARD location and should not get caught when you swing it open.

This Position Pin is a REPLACEMENT; if you lose or bend it, you can replace it by ordering a new one.

Cotton Beanie - 8” All black 100% ring-spung cotton

White 3M Vinyl Decal • Rigid Armor Logo

- Size: 4” x 4”

Custom Side License Plate relocator bracket mount

made for the the Hybrid Swing out Tire carrier

• 3/8 Bolt hardware

• 1/4 Bolt hardware

• Black semi gloss powder coat

• (no light included)

Replacement Quick Release Pin Billet grip

• billet grip

• 1/16 wire & crips

• safety pin

Fabric Type: Quick Dry Nylon

Care Instructions: Hand Wash Only

Closure Type: Drawstring

Sun Hat with Wide Brim and Neck Flap: This sunhat for men and women comes with a wide brim and neck flap that offers full sun protection from harmful UV sun rays. Whether you are hiking, traveling, gardening, or fishing, this hat will keep your face, ears, and neck protected. With a 24” head circumference, and a 3.7” brim, this adjustable fishing safari boonie hat is unisex and fits most sizes.